http://www.dpsinsider.com/forums/forum/jvc-kd-s100 Bongiovi Acoustics DPS Community en-US Fri, 10 Feb 2012 13:13:57 +0000 http://bbpress.org/?v=1.0.2 q http://www.dpsinsider.com/forums/search.php http://www.dpsinsider.com/forums/topic/chrysler-crossfire#post-1895 Tue, 31 Jan 2012 14:09:53 +0000 Joey Butera 1895@http://www.dpsinsider.com/forums/ <p>The VAR SUB beta profiles should work great in your situation. Here is the link: <a href="http://bongioviacoustics.com/products-car-kds100beta.php" rel="nofollow">http://bongioviacoustics.com/products-car-kds100beta.php</a></p> <p>You should burn a profile CD for each one and try them out as per the instructions. Use the volume on your subwoofer to control the low end. The SUB profiles seek to optimize the high and mid frequencies so you don't really need to use a crossover. </p> http://www.dpsinsider.com/forums/topic/chrysler-crossfire#post-1893 Wed, 25 Jan 2012 14:45:00 +0000 xfire07 1893@http://www.dpsinsider.com/forums/ <p>Update to first post - 6.5" in the lower doors not 5 1/4</p> <p>thanks </p> http://www.dpsinsider.com/forums/topic/chrysler-crossfire#post-1890 Tue, 24 Jan 2012 21:10:39 +0000 xfire07 1890@http://www.dpsinsider.com/forums/ <p>Looking for a profile for a 07 chrysler crossfire base model.</p> <p>Small car with very few speakers, 1 in each door and 2 tweeters only.</p> <p>I have 2 aftermarket component speakers 5 1/4 (in the lower doors) with tweeters and a 10 inch sub. </p> <p>Thanks! </p> http://www.dpsinsider.com/forums/topic/2006-ford-focus-zx3-se-profile-anyone-know-where-to-find-it#post-937 Wed, 06 Jul 2011 17:56:58 +0000 Madness 937@http://www.dpsinsider.com/forums/ <p>NVM found them on the forums the 2005 should work fine and if not I will test the beta profiles out </p> http://www.dpsinsider.com/forums/topic/2006-ford-focus-zx3-se-profile-anyone-know-where-to-find-it#post-936 Wed, 06 Jul 2011 13:48:17 +0000 Madness 936@http://www.dpsinsider.com/forums/ <p>I found one for the For the 2005 model but I can't seem to find the 2006 I assume the 2006 is close enough to the the 2005 it won't make much of a difference but I am just curious if anyone knows where I could find on for the 2006 </p> http://www.dpsinsider.com/forums/topic/after-market-speakers-and-amp-does-not-sound-as-good-as-stock-speakers#post-879 Fri, 10 Jun 2011 15:28:02 +0000 Joey Butera 879@http://www.dpsinsider.com/forums/ <p>No problem! The stock profile is designed to work with stock speakers. That is why we created these profile variations: <a href="http://www.bongioviacoustics.com/downloads/dps_kds100_beta_profiles_v_1.1.zip" rel="nofollow">http://www.bongioviacoustics.com/downloads/dps_kds100_beta_profiles_v_1.1.zip</a></p> <p>The instructions are in the readme file. Let us know if you have any problems. Also, click on the kd-s100 tag above and you will see a wealth of conversations on this topic! </p> http://www.dpsinsider.com/forums/topic/after-market-speakers-and-amp-does-not-sound-as-good-as-stock-speakers#post-876 Wed, 08 Jun 2011 20:56:18 +0000 0303bevue 876@http://www.dpsinsider.com/forums/ <p>For some reason upgrading the stock speakers on my 98 civic to infinity reference series with an alpine 250 watt by 4 amp sound horrible with the KD-S100. It sounds like the speakers are going to blow but these speakers sounded great in my other car with a different head unit and same amp. The kds100 has the universal profile cd installed in it. What I need to know is that do I need to download a different profile or do something else? Thank you in advance </p> http://www.dpsinsider.com/forums/topic/we-are-releasing-all-custom-profiles-for-the-jvc-kd-s100#post-817 Mon, 25 Apr 2011 00:01:48 +0000 Andrew Burton 817@http://www.dpsinsider.com/forums/ <p>Thanks for your response! I'll try it out.</p> <p>Andy </p> http://www.dpsinsider.com/forums/topic/we-are-releasing-all-custom-profiles-for-the-jvc-kd-s100#post-807 Mon, 18 Apr 2011 15:42:10 +0000 Joey Butera 807@http://www.dpsinsider.com/forums/ <p>I suggest trying VAR3 first. It sounds great in many cars! Also, the readme file has a few hints as to what profiles may work for your vehicle. </p> http://www.dpsinsider.com/forums/topic/we-are-releasing-all-custom-profiles-for-the-jvc-kd-s100#post-801 Mon, 18 Apr 2011 13:58:25 +0000 Rob Summers 801@http://www.dpsinsider.com/forums/ <p>Here is the link to the profiles that we made available.</p> <p><a href="http://www.bongioviacoustics.com/products-car-kds100beta.php" rel="nofollow">http://www.bongioviacoustics.com/products-car-kds100beta.php</a></p> <p>Yes only 1 profile on a CD to load it.</p> <p>As for which one would work best in a 2005 Toyota Prius, I'm not sure but I'll ask one of the tuning engineers. </p> http://www.dpsinsider.com/forums/topic/jvc-kd-s100-usb-mp3-id3-tag-problem#post-799 Mon, 18 Apr 2011 02:59:58 +0000 benenarmor 799@http://www.dpsinsider.com/forums/ <p>Mine started doing that a while ago, but it has gone away. I was working on my car, and I disconnected the battery. After I reconnected it and set everything back up, it wasn't doing it anymore. Maybe that will work for you. </p> http://www.dpsinsider.com/forums/topic/we-are-releasing-all-custom-profiles-for-the-jvc-kd-s100#post-791 Sat, 16 Apr 2011 17:32:08 +0000 Andrew Burton 791@http://www.dpsinsider.com/forums/ <p>Rob,</p> <p>I just purchased a used KD-S100 on Ebay and am about to get it installed. It did not, however, come with a CD. It was last used in a Dodge truck, which I'm sure sounds nothing like my 2005 Toyota Prius. Please forgive my "newbie" questions:</p> <p>1. Are all the profiles, including the Universal ones, available for download on this website? </p> <p>2. I just burn a profile onto a data CD, then follow your online instructions to install it, correct?</p> <p>3. One profile only per CD?</p> <p>4. The 2005 Toyota Prius is not, unfortunately for me, on the custom profile list. Any suggestions as to a profile that would come close?</p> <p>Thanks<br /> Andy </p> http://www.dpsinsider.com/forums/topic/any-more-dps-coming-to-aftermarket#post-488 Thu, 09 Dec 2010 14:01:18 +0000 Joey Butera 488@http://www.dpsinsider.com/forums/ <p>I can't agree with you more! I have heard rumors from upstairs that there are many new consumer oriented projects on the table. I'm sure aftermarket automotive audio is in there. If I can leak any info here I will! </p> http://www.dpsinsider.com/forums/topic/any-more-dps-coming-to-aftermarket#post-486 Wed, 08 Dec 2010 23:29:47 +0000 kangy3 486@http://www.dpsinsider.com/forums/ <p>With all the stuff with toyota and for windows, things seem to be looking up for DPS. I love it on my JVC KD-S100, and got to thinking, is anymore aftermarket products going to feature DPS? even as an add on? Because I think now that it's bigger and people see the potential on their computers and home audio, that bringing back to aftermarket could work better. All my friends love it and a few tried to buy the KD-S100 after seeing mine but they are extremely rare now. </p> http://www.dpsinsider.com/forums/topic/sd-card-question-for-the-kds-100#post-390 Thu, 30 Sep 2010 18:23:34 +0000 Strmtrper6 390@http://www.dpsinsider.com/forums/ <p>I know this is old, but the original problem the OP had was using an SDHC. SDHC uses a completely different block size and is not backwards compatible with SD card devices.</p> <p>Any 1GB or less card is guaranteed to work. 2GB and 4GB cards should work if you can find them(4GB is exceedingly rare for plain SD). I use a 2GB in mine with no problems.</p> <p>"Standard-SD cards (non-SDHC) with greater than 1 GB capacity</p> <p>The SD Card Association's current specifications define how a standard SD (non-SDHC) card with more than 1 GB and up to 4 GB capacity should be designed. These cards should be readable in any SD 1.01 devices that take the block length data into account. Any 1 GB or lesser card should always work (so the key question is how one's reader handles block length).</p> <p>According to the specification,[20] the maximum capacity of a standard SD card is defined by (BLOCKNR × BLOCK_LEN), where BLOCKNR may be (4,096 × 512) and BLOCK_LEN may be up to 2,048. This allows a capacity of 4 GB. The main problem is that some of the card readers support only a block (or, sector) size of 512 bytes, so greater than 1 GB non-SDHC cards may cause compatibility difficulties for users of such devices." </p> http://www.dpsinsider.com/forums/topic/if-you-are-looking-for-the-kd-s100-profile-variations#post-382 Fri, 24 Sep 2010 12:39:52 +0000 Joey Butera 382@http://www.dpsinsider.com/forums/ <p>I totally agree with loosing the Bazooka for the sealed box! Since VAR 3 has a lot of low end you can use the Bass controls in the KD-S100 to tune the system to your subwoofer. Keep in mind the subwoofer output is NOT processed by the DPS in the radio. That is by design. </p> http://www.dpsinsider.com/forums/topic/if-you-are-looking-for-the-kd-s100-profile-variations#post-381 Thu, 23 Sep 2010 21:06:48 +0000 jbmmpm 381@http://www.dpsinsider.com/forums/ <p>I have tried the VAR 01 - 03 profiles so far. I am currently using the VAR 03 profile, and will likely stick with it for awhile. It gives me the best overall tonal balance, and pretty good staging. The others weren't bad, but a little too bright for my taste.</p> <p>My car is a 2007 Pontiac G6<br /> My system consists of:<br /> Alpine 5.25" SPR-136A components in the front<br /> Boston 6x9 SL95 2 ways in the rear<br /> A Bazooka NOS 8 in the trunk, driven by an ESA (Circuit City closeout) 150 watt bridged amp</p> <p>Sounds plenty good, although the Bazooka will be gone when I can find a decent 10" in a sealed box! </p> http://www.dpsinsider.com/forums/topic/we-are-releasing-all-custom-profiles-for-the-jvc-kd-s100#post-371 Mon, 13 Sep 2010 17:31:16 +0000 Rob Summers 371@http://www.dpsinsider.com/forums/ <p>Ok all the profiles can now be found at <a href="http://www.bongioviacoustics.com/products-car-kds100beta.php" rel="nofollow">http://www.bongioviacoustics.com/products-car-kds100beta.php</a> </p> http://www.dpsinsider.com/forums/topic/we-are-releasing-all-custom-profiles-for-the-jvc-kd-s100#post-368 Mon, 13 Sep 2010 13:58:01 +0000 RottDog 368@http://www.dpsinsider.com/forums/ <p>Is this link broken? I have an '08 Tundra (single cd radio) and am currently using var_03. Is there a profile that that would work better for me?</p> <p>Found the profiles. I will try the Tundra SR5 profile. The SR5 does not have the same sound system in it as mine. </p> http://www.dpsinsider.com/forums/topic/we-are-releasing-all-custom-profiles-for-the-jvc-kd-s100#post-357 Sat, 28 Aug 2010 16:43:24 +0000 thesebastiancat 357@http://www.dpsinsider.com/forums/ <p>Rob,</p> <p>Thanks so much for posting that link to the custom profiles! </p> http://www.dpsinsider.com/forums/topic/we-are-releasing-all-custom-profiles-for-the-jvc-kd-s100#post-349 Tue, 17 Aug 2010 16:07:53 +0000 jbmmpm 349@http://www.dpsinsider.com/forums/ <p>Rob,<br /> Thank you for providing the link for the vehicle specific profiles. Those were the ones I was looking for - I guess<br /> I wasn't clear.</p> <p>I have a 07 Pontiac G6, which isn't in those profiles, but maybe one of the other ones will work well. I'll let<br /> you know how my trials go.</p> <p>Jim Meier </p> http://www.dpsinsider.com/forums/topic/if-you-are-looking-for-the-kd-s100-profile-variations#post-347 Mon, 16 Aug 2010 15:26:16 +0000 Rob Summers 347@http://www.dpsinsider.com/forums/ <p>You can get all the custom profiles that were made during the KD-S100 program at the link below.</p> <p><a href="http://www.bongioviacoustics.com/downloads/KDS100_vehicle_profiles.zip" rel="nofollow">http://www.bongioviacoustics.com/downloads/KDS100_vehicle_profiles.zip</a> </p> http://www.dpsinsider.com/forums/topic/we-are-releasing-all-custom-profiles-for-the-jvc-kd-s100#post-346 Mon, 16 Aug 2010 15:24:17 +0000 Rob Summers 346@http://www.dpsinsider.com/forums/ <p>The custom car profiles were only available to the dealers at the time of install.</p> <p>Sorry about the last link, this zip file contains all the profiles for cars that were tuned during the KD-S100 program.</p> <p><a href="http://www.bongioviacoustics.com/KDS100_vehicle_profiles.zip" rel="nofollow">http://www.bongioviacoustics.com/KDS100_vehicle_profiles.zip</a> </p> http://www.dpsinsider.com/forums/topic/we-are-releasing-all-custom-profiles-for-the-jvc-kd-s100#post-345 Sat, 14 Aug 2010 18:08:16 +0000 thesebastiancat 345@http://www.dpsinsider.com/forums/ <p>Thanks Rob,</p> <p>I've had the JVC unit in my car for some tinme and it has been great thanks to the DPS! </p> <p>I've been getting the bug to tinker with the system. This gives me a much easier way to experiment with it. Shuld keep me busy and happy for a while.</p> <p>One question, were the custom profiles available to non-dealers?</p> <p>Thanks again. </p> http://www.dpsinsider.com/forums/topic/we-are-releasing-all-custom-profiles-for-the-jvc-kd-s100#post-343 Thu, 12 Aug 2010 20:23:29 +0000 Rob Summers 343@http://www.dpsinsider.com/forums/ <p>Sorry the profiles have been moved. They are now at <a href="http://www.bongioviacoustics.com/kds100beta.html" rel="nofollow">http://www.bongioviacoustics.com/kds100beta.html</a> </p> http://www.dpsinsider.com/forums/topic/we-are-releasing-all-custom-profiles-for-the-jvc-kd-s100#post-342 Thu, 12 Aug 2010 17:09:28 +0000 jbmmpm 342@http://www.dpsinsider.com/forums/ <p>I tried the provided link - <a href="http://www.digitalpowerstation.net/login.htm" rel="nofollow">http://www.digitalpowerstation.net/login.htm</a><br /> The browser changed it to - <a href="http://bongioviacoustics.com/login.htm" rel="nofollow">http://bongioviacoustics.com/login.htm</a></p> <p>The end result of this was :<br /> The page you tried to access does not exist on this server. This page may not exist due to the following reasons: </p> <p>You are the owner of this web site and you have not uploaded (or incorrectly uploaded) your web site. For information on uploading your web site using FTP client software or web design software, click here for FTP Upload Information. </p> <p>The URL that you have entered in your browser is incorrect. Please re-enter the URL and try again. </p> <p>The Link that you clicked on incorrectly points to this page. Please contact the owner of this web site to inform them of this situation. </p> <p>Can someone shine some light on this for me. I'd like to be able to try some of the custom profiles for my Pontiac G6.</p> <p>Thanks,<br /> Jim </p> http://www.dpsinsider.com/forums/topic/if-you-are-looking-for-the-kd-s100-profile-variations#post-341 Thu, 12 Aug 2010 16:24:34 +0000 jbmmpm 341@http://www.dpsinsider.com/forums/ <p>I have downloaded the beta profiles, and can't wait to try them. However, there is a mention here of custom profiles that are available, and I can't seem to locate them. Do I need special permissions or something. I can't seem to find any links, or mention of any links that would get me there. Thanks for any info. </p> http://www.dpsinsider.com/forums/topic/jvc-arsenal-kd-ahd59#post-339 Sat, 07 Aug 2010 20:05:53 +0000 Joey Butera 339@http://www.dpsinsider.com/forums/ <p>Unfortunately, no. :( The KD-S100 is actually based on the KD-S1000 I believe and JVC made many modifications to incorporate the DPS technology. </p> http://www.dpsinsider.com/forums/topic/jvc-arsenal-kd-ahd59#post-338 Thu, 05 Aug 2010 19:35:36 +0000 keoki 338@http://www.dpsinsider.com/forums/ <p>I was sure interested in the KD-S100 at Crutchfield a few years ago when I got my head unit, but the price at that time about $500, so I got the above (very good) unit instead. Any chance it could be retrofitted and "turned into" a KD-S100? </p> http://www.dpsinsider.com/forums/topic/sd-card-question-for-the-kds-100#post-336 Thu, 05 Aug 2010 13:05:21 +0000 midnightsday 336@http://www.dpsinsider.com/forums/ <p>i'm using a 1gb Transcend card, no problems except it holds about 800mb of .mp3 format but, I created a folder and add another 150mb. Sound Is superior and 1 of the best features. </p>